Switch Section Requirements

From ROBOTC API Guide
Jump to: navigation, search

Previous sections

  • Getting started with Arduino
  • Using LEDs
  • Robot Motion

Parts

These are all included in the BoeBot kit.

  • Complete BoeBot robot with Arduino Shield
  • Various wires of different lengths and colors
  • 470Ω Resistor (Yellow-Violet-Brown ResistorBand1Yellow.pngResistorBand2Violet.pngResistorBand3Brown.png)
  • 2x 10kΩ Resistors (Brown-Black-Orange ResistorBand1Brown.pngResistorBand2Black.pngResistorBand3Orange.png)
  • 2x 220Ω Resistors (Red-Red-Brown ResistorBand1Red.pngResistorBand2Red.pngResistorBand3Brown.png)
  • 2x 3-pin male header
  • LED of any color
  • Momentary push-button switch
  • Parallax BoeBot Whiskers parts
    • 2x BoeBot whiskers
    • 2x 1/2" metal standoff
    • 2x plastic washer
    • 2x long screw