|ROBOTC requires basic system specifications to run properly. The development environment is not processor intensive, but the interactive debugger may slow down computer performance on older machines.
Intel® Pentium® processor or compatible, 800 MHz minimum
Windows XP Professional or Home Edition with Service Pack 2 or greater
256MB of RAM minimum
Up to 30MB of available hard disk space
1 available USB port
Compatible Bluetooth adapter (optional)
ROBOTC will not run natively in any other operating system other than Microsoft Windows. ROBOTC will run with a Virtualization client on a Apple Macintosh. ROBOTC has been tested with VMWare Fusion, Parallels Desktop, and Apple's Boot Camp. You will still need to download/install device drivers found on your purchased CD or on the ROBOTC website.
Uninstalling and Installing ROBOTC
|You must uninstall your previous version of ROBOTC before upgrading to the newest version of ROBOTC.|
To uninstall ROBOTC, follow these steps:
1. Open the Control Panel from your "Start Menu"
2. Inside of the Control Panel, select "Add or Remove Programs"
3. Navigate through the "Add or Remove Programs" list until you find your version of ROBOTC that you wish to uninstall. Press the "Remove button"
4. Windows will start the uninstall process. When the window below disappears and you are returned to the "Add or Remove Programs" list, ROBOTC has been successfully uninstalled.
|To Install the latest version of ROBOTC, follow these steps:
1. Double click on the ROBOTC installer. You will be presented with the Installshield installer for ROBOTC. Click "Next" to proceed.
2. Before you can proceed, you must read over the accept the End User License Agreement. Click "I accept" and then the "Next" button to proceed.
3. Choose where you would like to install ROBOTC to. By default, ROBOTC is installed to your "Program Files" folder. Click "Next" to proceed.
4. The installer will ask you to confirm your settings. If everything looks correct, click "Install" to being the installation process.
5. The installer will begin copying files from the installer to your computer. Please wait until this is complete.
6. When the installation is complete, the install will inform you of this. Click "Finish" to complete your install.
7. Double click the "ROBOTC for Mindstorms" icon to launch ROBOTC.
|To continue using ROBOTC past the 30 day trial period, you must purchase a ROBOTC license and then activate the license on each computer.
To activate ROBOTC, you will need the License ID and Password that was sent to you during the purchase process.
- If you purchased a ROBOTC license online, the License ID and Password were sent to the email address specified.
- If you ordered the CD-ROM version of ROBOTC, the License ID and Password are printed on the CD label.
If you are Activating the ROBOTC license on computers with internet access, follow the Activation instructions below. If you are activating the ROBOTC license on computers without internet access, skip to Activate by Web instructions.
NOTE: ROBOTC must be activated on each individual computer.
Follow these steps to activate on a computer with internet access:
1. Open ROBOTC and select "Activate ROBOTC" from the start-up prompt.
2. Select "Activate ROBOTC for MINDSTORMS Online"
3. Enter in your License ID and Password that you received via emaill. Click the "Continue" button to proceed.
4. ROBOTC will communicate with the activation server via the internet to verify your License ID and Password.
5. ROBOTC is activated and ready for use. Click Continue to use ROBOTC for MINDSTORMS.
Activate by Web
|Follow these steps to activate on a computer without internet access:
Note: You will need to use a separate computer with Internet access in step 4 at this activation process. You must repeat this process on each computer without internet access.
1. Open ROBOTC and select "Activate ROBOTC" from the menu.
2. Select "Activate by Web"
3. Two user codes will be displayed. Copy both of these down. Take these codes with you to a separate computer with Internet access.
4. At a separate computer with internet access, visit http://www.robotc.net/register. Enter your License ID and Password that you received via email and click "Next."
5. Enter User Code 1 and User Code 2 that you copied down in step 3. Click "Next" to proceed.
6. A Registration code will be displayed. Write this down and return to the original computer on which ROBOTC is installed.
7. Enter the Registration code from step 6 into the "Activation Code 1" field.
Note: Leave Activation Code 2 blank.
8. ROBOTC will be activated and ready for use. Click Continue to use ROBOTC.
Select Platform Type
|ROBOTC for MINDSTORMS has support for four different platforms:
- LEGO Mindstorms RCX
- LEGO Mindstorms NXT
- LEGO Mindstorms NXT + TETRIX
- Robot Algebra (NXT)
Before you use ROBOTC, make sure to select which platform you are currently using.
Changing Platform Type:
Open the "Robot" menu in ROBOTC and hover your cursor over the "Platform Type" menu option. This will open up the platform select menu. Select the platform you wish you use with ROBOTC. You can change the platform type at any time.
Getting Started with Arduino
To get started with your Arduino board, head over to the Getting Started with Arduino page!
Getting Started with NXT and TETRIX
To get started with your NXT or TETRIX device, head over to the Getting Started with NXT and TETRIX page!
Getting Started with the VEX CORTEX
To get started with your VEX CORTEX, head over to the Getting Started with VEX CORTEX page!
Getting Started with the VEX PIC
To get started with your VEX PIC, head over to the Getting Started with VEX PIC page!