Difference between revisions of "Tutorials/Arduino Projects/Mobile Robotics/Lego/LED Prerequisites"

From ROBOTC API Guide
Jump to: navigation, search
(Created page with "{{DISPLAYTITLE:LED Prerequisites}} <yambe:breadcrumb>Tutorials/Arduino_Projects/Mobile_Robotics/Lego|Lego + Arduino, Mobile Robotics Platform</yambe:breadcrumb> {{tl|1|}} ==Ov...")
 
m (Parts List)
Line 9: Line 9:
 
In order to complete the projects in this section, you will need:
 
In order to complete the projects in this section, you will need:
 
- LEGO+Arduino Robot Base with DFRobot Motor Shield
 
- LEGO+Arduino Robot Base with DFRobot Motor Shield
 +
 
- 2 LEDs (preferably Red, but the examples also use Orange LEDs) - can be found at www.sparkfun.com [http://www.sparkfun.com/products/533]
 
- 2 LEDs (preferably Red, but the examples also use Orange LEDs) - can be found at www.sparkfun.com [http://www.sparkfun.com/products/533]
 +
 
-At least four Jumper wires of various sizes and colors - These can be found anywhere, but the ones used in the examples came from www.sparkfun.com [http://www.sparkfun.com/products/8431]
 
-At least four Jumper wires of various sizes and colors - These can be found anywhere, but the ones used in the examples came from www.sparkfun.com [http://www.sparkfun.com/products/8431]
 +
 
-2 470Ω resistors - again, my be found in many places, but ours are from www.sparkfun.com [http://www.sparkfun.com/products/10969] (The sparkfun kit contains a large number of resistors of various types to suit any electronics projects you have in mind)
 
-2 470Ω resistors - again, my be found in many places, but ours are from www.sparkfun.com [http://www.sparkfun.com/products/10969] (The sparkfun kit contains a large number of resistors of various types to suit any electronics projects you have in mind)

Revision as of 19:41, 27 June 2012

ArduinoArduino Tutorials and Guided ProjectsLego + Arduino, Mobile Robotics Platform → Tutorials/Arduino Projects/Mobile Robotics/Lego/LED Prerequisites

Overview

This section is designed to teach the basic principles of LED wiring and usage, as well as to provide an introduction to electronics and the electronics setup of the Arduino + LEGO Robot.


Parts List

In order to complete the projects in this section, you will need: - LEGO+Arduino Robot Base with DFRobot Motor Shield

- 2 LEDs (preferably Red, but the examples also use Orange LEDs) - can be found at www.sparkfun.com [1]

-At least four Jumper wires of various sizes and colors - These can be found anywhere, but the ones used in the examples came from www.sparkfun.com [2]

-2 470Ω resistors - again, my be found in many places, but ours are from www.sparkfun.com [3] (The sparkfun kit contains a large number of resistors of various types to suit any electronics projects you have in mind)