ARDUINO MEGA Functions Serial Link

From ROBOTC API Guide
Jump to: navigation, search
(→configureSerialPort)
 
(2 intermediate revisions by one user not shown)
Line 1: Line 1:
−
<yambe:breadcrumb>ARDUINO_MEGA_Functions_and_Variables|Functions and Variables</yambe:breadcrumb>
+
{{DISPLAYTITLE:2560 (MEGA) Serial Link Functions}}
 +
<yambe:breadcrumb self="2560 (MEGA) Serial Link">ARDUINO_MEGA_Functions_and_Variables|Functions and Variables</yambe:breadcrumb>
 
<br />
 
<br />
 +
 
The Arduino MEGA has 4 user serial ports - 1 reversed for the system and 3 user controllable serial ports. These serial ports can be configured in code or via the Motors and Sensor Setup window. The serial ports are buffered - a 70 byte receive buffer and a 40 byte transmit buffer.
 
The Arduino MEGA has 4 user serial ports - 1 reversed for the system and 3 user controllable serial ports. These serial ports can be configured in code or via the Motors and Sensor Setup window. The serial ports are buffered - a 70 byte receive buffer and a 40 byte transmit buffer.
  

Latest revision as of 13:54, 11 May 2012

ARDUINO → Functions and Variables → 2560 (MEGA) Serial Link


The Arduino MEGA has 4 user serial ports - 1 reversed for the system and 3 user controllable serial ports. These serial ports can be configured in code or via the Motors and Sensor Setup window. The serial ports are buffered - a 70 byte receive buffer and a 40 byte transmit buffer.

SerialPortsMega.png

Contents
Color Key
Function:
Variable:


getChar

short getChar(const TUARTs nPort)
(short) Function will retrieve the next character from the buffer that was sent to port 'nPort'.


Parameter Explanation Data Type
nPort A sensor port or name TUARTs 


getChar(uartOne);  // retrieve the next char from UART Port 'uartOne'


sendChar

void sendChar(const TUARTs nPort, short nChar)
(void) Function will send the next character to port 'nPort'.


Parameter Explanation Data Type
nPort A sensor port or name TUARTs
nChar A char to send to 'nPort'. (Can be a short or a char) short 


sendChar(uartOne, 'B');  // send the next char from UART Port 'uartOne'


setBaudRate

void setBaudRate(const TUARTs nPort, TBaudRate nBaudRate)
(void) Function will set the Baud Rate for port 'nPort'.

Acceptable Baud Rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 200000, 230400 and 250000.


Parameter Explanation Data Type
nPort A sensor port or name TUARTs
nBaudRate The baud rate to use TBaudRate 


setBaudRate(uartOne, baudRate9600);  // retrieve the next char from UART Port 'uartOne'


configureSerialPort

void configureSerialPort(const TUARTs nPort, TSerialPortMode nMode)
(void) This function will manually configure the serial port for a specific mode (system, user, Xbee, VEX LCD, etc). You can also set this same functionality using the "Motors and Sensor Setup" window.


Parameter Explanation Data Type
nPort A sensor port or name TUARTs
TSerialPortMode The type of the serial device attached to this pin. TSerialPortMode 


configureSerialPort(UART1, uartUserControl);  //Configures UART1 as a User Control Serial Port


bXmitComplete

bool bXmitComplete(const TUARTs nPort)
(bool) Function will return if the transmit (Xmit) buffer is empty.


Parameter Explanation Data Type
nPort A sensor port or name TUARTs 


  sendChar(UART1, 'H');      //Send a character
  if(!bXmitComplete(UART0))  //Wait until character has been transmitted
    wait1Msec(1);


Retrieved from "http://www.robotc.net/w/index.php?title=ARDUINO_MEGA_Functions_Serial_Link&oldid=3289"
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox