| View unanswered posts | View active topics |
It is currently Sat Feb 16, 2019 1:03 am |
|
All times are UTC - 5 hours [ DST ] |
|
Page 1 of 1 |
[ 5 posts ] |
| Print view | Previous topic | Next topic |
Vex Pic Ifi V.5 Rx/Tx ports for UART Comm. with Raspberry Pi
| Author | Message |
|---|---|
|
Rookie
Joined: Thu May 02, 2013 7:36 pm Posts: 2 
|
 Vex Pic Ifi V.5 Rx/Tx ports for UART Comm. with Raspberry PiI want to use the Tx/Rx ports on my Vex for serial communication with a Raspberry Pi.
How can I accomplish this with RobotC? All I can find for using the Tx/Rx ports is for displaying on a Vex display, and I don't want that, I want serial communications, just like sendChar(). Thanks in advance.  |
| Thu May 02, 2013 7:46 pm |
|
|
|
|
Rookie
Joined: Wed Feb 09, 2011 1:08 am Posts: 27
|
Re: Vex Pic Ifi V.5 Rx/Tx ports for UART Comm. with Raspberr you can start here:
http://www.robotc.net/firewiki/index.ph ... =Main_Page Also I posted 2 related topics Here: http://www.vexforum.com/showthread.php?t=74951 http://www.vexforum.com/showthread.php?t=75543 You don't need to use the XBEE just connect the TX on the PIC to the Rx on the Pi and the TX on the PI to the Rx on the Pic and connect PI ground to a PIC ground so they have a common ground. It should work. I haven't tried the connection with the Pi yet but have been successful connecting a PIC and a Cortex to an Arduino. Cheers Kb |
| Fri May 03, 2013 7:40 am |
|
|
|
|
Rookie
Joined: Thu May 02, 2013 7:36 pm Posts: 2
|
Re: Vex Pic Ifi V.5 Rx/Tx ports for UART Comm. with Raspberr Thanks for the help, I got serial loopback stuff working with my Vex!
 So the problem was that I had a misconception of what uartOne and uartTwo were, I thought they were the Rx1 and Rx2 receiver ports on the Vex. Thanks again! |
| Fri May 03, 2013 2:33 pm |
|
|
|
|
Rookie
Joined: Wed Feb 09, 2011 1:08 am Posts: 27
|
Re: Vex Pic Ifi V.5 Rx/Tx ports for UART Comm. with Raspberr Good to hear you got it working. Best wishes for the project - Kb
|
| Tue May 07, 2013 8:04 am |
|
|
|
|
Rookie
Joined: Thu Mar 13, 2014 11:11 am Posts: 1
|
Re: Vex Pic Ifi V.5 Rx/Tx ports for UART Comm. with Raspberr How could I connect a raspberry pi to a cortex controller so that when I start a program on the cortex it plays audio from the raspberry pi? Thanks!
|
| Thu Mar 13, 2014 11:14 am |
|
|
|
Page 1 of 1 |
[ 5 posts ] |
|
All times are UTC - 5 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 2 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |
