Hi,
I managed to get a connection between the NXT and the PC and run some bluetooth examples. However, I can't download the program using BT (only via USB) nor controlling the NXT remotely ( Remote Desktop) although the brick and the pc are connected via BT. Any suggestions?
Thanks

Hi SS_8

Have you tried setting up a bluetooth conection using the link setup wizard?

It is located under Robot/NXT Brick/Link Setup in the upper menu. There you can setup a bluetooth link between the NXT and RobotC. You may have to remove the pairing between the NXT and pc before it will work, there is a button to do this. Also, make sure you are using the windows bluetooth manager and not third party software, the connection wont work.

Hope this helps B-)
Scott

Thanks for your help.
I tried it and I got "no NXT brick could be found" message. I forgot to mention that I couldn't run the bluetooth examples at the beginning. however, I used iCommand which successfully established a connection between the PC and the brick. So I used that connection to run the robotC BT examples.
I'm using BT manager no third party app is used.
any help??

Hmmm ok, there is another thread where dick has posted some things to check, here is the thread. Let me know if this helps B-)

viewtopic.php?t=292

I followed all the step Dick listed but it didn't work. I still can't point where the problem is exactly! because the connection is there, the PC and the brick are connected. I've even run some java app and got the sonar values via BT. But once I try to connect the brick with the RobotC I got "No NXT found".
one more thing, I can't establish the connection from the brick because it gives me " Busy line or not found" message. That's why I'm using iCommand to establish the connection from the pc.
Any help is greatly appreciated!