View unanswered posts | View active topics It is currently Wed Feb 20, 2019 7:20 am

Reply to topic  [ 3 posts ] 
Simple Question: Rotations 
Author Message

Joined: Wed Oct 05, 2011 4:34 pm
Posts: 4
Post Simple Question: Rotations

I'm a member from the Jaguars Team. I have a simple n00by question, for the default TETRIX robot (built from the manual), how many rotations (or "clicks") would it take to make a simple 90 degree (I do know 1440 ticks = 1 rotation but don't know how many to make a complete right or left turn). I believe the NXT is 2 roations for 90 degrees with 1 motor running (with both it's probably less).

Thanks for the help, I wish I knew the answer to this simple question!


Thu Oct 13, 2011 5:05 pm
User avatar

Joined: Sun Nov 15, 2009 5:46 am
Posts: 1523
Post Re: Simple Question: Rotations
It depends on what kind of turn you are making. For example, are you turning the left and right wheels with equal power but in opposite direction (turn in place)? Or are you turning with one wheel stopped and other wheel forward (swing turn)? This affects the pivot point. Assuming you are turning the wheels in opposite directions (turn in place), your pivot point will be the centroid between the four wheels (or however many wheels). Then you can use the following. It will give you a good initial value but you may still need to fine tune it for compensating inaccurate measurement and real world factors.
#define GEAR_RATIO              (24.0/16.0)     //motor:wheel=24:16
#define WHEEL_CIRCUMFERENCE     13.00           //in inches
#define CLICKS_PER_REVOLUTION   1440.0          //in clicks
#define WHEELBASE_DISTANCE      60.00           //in inches

// Assuming the encoder is mounted on the motor shaft.

Basically, if you turn in place, you are drawing a circle on the ground with the center of the circle being the centroid of the wheel base with the diameter approximately equal to the distance between diagonal wheels. Therefore, you first translate the number of encoder ticks to the distance travelled on one of the wheels. Then assume the wheel is travelling along the circumference of the circle, you can calculate the relationship between the distance travelled and the degrees turned.

Thu Oct 13, 2011 6:44 pm

Joined: Wed Oct 05, 2011 4:34 pm
Posts: 4
Post Re: Simple Question: Rotations
Thanks for the help! We figured it out after a little while.

Fri Oct 14, 2011 4:07 pm
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.