| View unanswered posts | View active topics |
It is currently Thu Jul 31, 2014 6:23 pm |
|
All times are UTC - 5 hours [ DST ] |
|
Page 1 of 1 |
[ 2 posts ] |
| Print view | Previous topic | Next topic |
Missing The ROBOTC. Master CPU, and VEXnet Joystick Firmware
| Author | Message |
|---|---|
|
Rookie
Joined: Tue Oct 12, 2010 11:40 am Posts: 2 
|
 Missing The ROBOTC. Master CPU, and VEXnet Joystick FirmwareIn the Robot drop down bar, we are missing the ROBOTC, Master CPU, and VEXnet Firmwares, in the download firmware option. We are trying to get the robot back to default settings but cant get the firmware to download. this is a very urgent thing because our test drive is saturday the 16th. Any help is appreciated and please respond as quickly as possible.
|
| Tue Oct 12, 2010 11:51 am |
|
|
|
|
Site Admin  Joined: Tue May 15, 2007 9:02 am Posts: 403
|
Re: Missing The ROBOTC. Master CPU, and VEXnet Joystick Firmware To clarify, were the options there at one point, and they disappeared? Or were they never there?
The options should never disappear, but if that's the case, here's a few things to try: - Verify that your Robot > Platform Type is set to VEX 2.0 Cortex - Uninstall and re-install ROBOTC If the options were never there, you may be using an older version of ROBOTC. Download the latest from: http://www.robotc.net/download/cortex/ |
| Tue Oct 12, 2010 12:34 pm |
|
|
|
Page 1 of 1 |
[ 2 posts ] |
|
All times are UTC - 5 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 1 guest |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |
