ROBOTC.net forums
http://www.robotc.net/forums/

Introduction to EV3 world didn't load properly.
http://www.robotc.net/forums/viewtopic.php?f=75&t=10586
Page 1 of 1

Author:  EDUCAZOOM [ Fri Feb 27, 2015 4:34 pm ]
Post subject:  Introduction to EV3 world didn't load properly.

Hi Guys,

This is my first post in this forum. I've searched before in this forum and can't find any topic related to the problem I'm facing.
I've installed Virtual Brick version 2.5.0.0

When I try to load Introduction to EV3 World, the windows appear (in blank) and the other window (to log in into cs2n) barely appear and the both windows disappear.

Moreover, when I load the Chalenge pack for EV3, the world load properly, but the robots to select are NXT (not EV3 robots)

Any clue as to what might be happening?

Thanks in advance for your time.

.......................................
Virtual Brick version 2.5.0.0
Windows 7 Home Basic - SP1
64bit System

Author:  mightor [ Sat Feb 28, 2015 2:01 am ]
Post subject:  Re: Introduction to EV3 world didn't load properly.

Hey there,

Does your computer meet the following minimal specs? (taken from this document, page 9)
  • PC Compatible OS: Windows XP, Windows Vista, Windows 7, or
    Windows 8
  • Processor: Intel Core 2 Duo processor family or better, AMD Athlon X2
    processor family or better
  • Memory: 2 GB RAM
  • Graphics: NVIDIA® GeForce® 8800GTS or better, ATI Radeon™ HD
    3850 or better
  • DirectX®: DirectX® 9.0c and DirectX® 10
  • Hard Drive: 350 MB free hard drive space
  • Sound: Standard audio device
= Xander

Author:  EDUCAZOOM [ Mon Mar 02, 2015 6:01 pm ]
Post subject:  Re: Introduction to EV3 world didn't load properly.

Hi Xander, good to see you.

here's my set up:
............................................................................
Windows 7 SP1 - 64bit
Processor: Intel Core I5-2450M @ 2.5GHz
Memory: 4 GB RAM
Graphics: INTEL HD GRAPHICS 3000
DirectX®: DirectX® 11
Hard Drive: Free 213GB
Sound: IDT High Definition Audio (DELL)
............................................................................

Maybe my graphics are less than the needed.

The EV3 world (introduction to EV3) didn't load and also the 'EV3 robots' in the "EV3 Challenge pack" (the robots I see are NXT). The scenarios for EV3 are ok!!

(The curriculum companion and the RVW Level Builder load perfectly).

My question is: Is there a possibility that this is a due to the graphical weakness?

Thank you in advancce for your time.

Cheers!

Author:  mightor [ Tue Mar 03, 2015 1:29 am ]
Post subject:  Re: Introduction to EV3 world didn't load properly.

Hi there,

I am not sure, you may want to drop a mail to support@robotc.net and refer to this thread. They have a much better idea of what works and what doesn't. Which programming environment are you trying to use it with?

= Xander

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/