Re: IQ Bot not running code autonomously
Not entirely certain if things are not working or if they're fixed.
In any case, make sure you remember the following:
1. When programming "Tele-Op" programs, you'll have to change the mode in ROBOTC from Autonomous to Tele-Op (Robot - VEX IQ Controller Mode)
2. When in Tele-Op mode, even if your program is 100% autonomous, you will still need a VEX IQ Wireless Controller powered on and linked to your VEX IQ Brain for the robot to actually run the program. This is a limitation of the hardware and something outside of ROBOTC's control.
3. If you're mode is set to "Autonomous", remember on the main VEX IQ menu that programs loaded under "Autonomous" mode will appear under the "Auto Pgms" (Autonomous Programs) menu. In Tele-Op, they'll appear under "TeleOp Programs"
ROBOTC Developer - SW Engineertfriez@robotc.net