ROBOTC.net forums
http://www.robotc.net/forums/

Unable to program robot.. only 16 days left.
http://www.robotc.net/forums/viewtopic.php?f=53&t=3083
Page 1 of 1

Author:  treytide [ Wed Mar 02, 2011 7:13 pm ]
Post subject:  Unable to program robot.. only 16 days left.

and we are still not able to program.

We have tried to download the master firmware several times and it still isn't working. We do not know what the problem is, but the cortex's light still are not lighting up the way they should. We hav the lastest software and we are following the intructions on robot-c.net, but it still is not working. Help!

Subject edited by Mightor

Author:  hakuna [ Thu Mar 03, 2011 2:37 pm ]
Post subject:  Re: Unable to program robot.. only 16 days left.

Try turning off the cortex. Using a paperclip end, push and hold the config button...while turning it on. Then try to download.

Make sure you are using 2.31 Robot C. That cleared up a lot of the problems we were having with firmware and USB.

If it STARTS downloading and fails, just keep trying. When we were using 2.30 it was taking as many as 8 attempts before it would work without failing.

Gary

Author:  jbflot [ Tue Mar 08, 2011 11:48 am ]
Post subject:  Re: Unable to program robot.. only 16 days left.

Hi Trey,

Can you update me on the status of your robot? Are you having luck, or still having trouble?

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/