ROBOTC.net forums
http://www.robotc.net/forums/

Simple tutorial: Logitech Controller
http://www.robotc.net/forums/viewtopic.php?f=52&t=3848
Page 1 of 1

Author:  Gondorf5 [ Thu Dec 08, 2011 9:16 pm ]
Post subject:  Simple tutorial: Logitech Controller

:programmer:

Where can I find a tutorial for programming my FTC Robot programs to my Logitech Controller?
The CS2N Learn site is not helping me in that aspect.

Ask for details, and you will recieve.

:breakcomputer:

Author:  magicode [ Thu Dec 08, 2011 10:20 pm ]
Post subject:  Re: Simple tutorial: Logitech Controller

Are the sample programs in ROBOTC not helping?

Author:  Gondorf5 [ Thu Dec 08, 2011 10:46 pm ]
Post subject:  Re: Simple tutorial: Logitech Controller

Sample programs? You can set those up to controllers? I thought that was automated programming. :shock:

Author:  JonBons [ Fri Dec 09, 2011 6:18 pm ]
Post subject:  Re: Simple tutorial: Logitech Controller

The sample programs include autonomous and teleop programs. You can find an example of a basic joystick program in the FIRST Tech Challenge folder via the "Open Sample Program" menu item. The Joystick1.c file has a basic example of controlling motors with your joystick.

Author:  Gondorf5 [ Tue Jan 03, 2012 12:56 am ]
Post subject:  Re: Simple tutorial: Logitech Controller

Alright, automated and teleop... I'll check those out and see if they help. We'll see how much progress I make after that, hmm?

Author:  l0jec [ Tue Jan 03, 2012 3:35 pm ]
Post subject:  Re: Simple tutorial: Logitech Controller

Not sure if it has what you're looking for, but here's a short article on JoystickDriver.c and the various functions you can use to interact with the joystick for FTC.

http://greenarmyrobotics.org/robotc/robotcs-joystickdriver-c

Author:  techappetite [ Sat Jan 07, 2012 12:34 pm ]
Post subject:  Re: Simple tutorial: Logitech Controller

I actually recently wrote a program that writes the teleop code for you. I call it Teleop Catalyst for RobotC.
A picture is worth a thousand words:

Image

My program generates fully functional, competition-legal teleop code that you can immediately run on your robot. The code
is also commented, which helps if you want to dig into the code and see how it works :D

You can learn more, and download it for free on my team's website: http://ftc.kcastromechs.org/catalyst/

I hope it helps!

Author:  Gondorf5 [ Sun Jan 08, 2012 12:53 am ]
Post subject:  Re: Simple tutorial: Logitech Controller

Hmm. That's very interesting. I might take a closer look at it.

By the way, those templates are helping. I generally have trouble understanding code, but a little more :poke: at the problems should answer a few of my questions.

Author:  tfriez [ Mon Jan 09, 2012 4:19 pm ]
Post subject:  Re: Simple tutorial: Logitech Controller

For help using the Logitech Joysticks, take a look at the freely-available ROBOTC Curriculum. It's available here:
http://www.education.rec.ri.cmu.edu/pre ... index.html

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/