ROBOTC.net forums
http://www.robotc.net/forums/

HiTechnic Angle Sensor?
http://www.robotc.net/forums/viewtopic.php?f=41&t=6884
Page 1 of 1

Author:  homerun33ss [ Thu Oct 03, 2013 4:52 pm ]
Post subject:  HiTechnic Angle Sensor?

Can somebody give me a simple sample code to do ANYTHING with the HiTechnic angle sensor? I've looked it up and even went to the source and still have yet to find a sample program. At least, not any for the RobotC program...
Also, if you don't write one, but happen to find a link for one that I can download/copy, that would be awesome too. Thanks! 8)

Author:  rcahoon [ Thu Oct 03, 2013 5:09 pm ]
Post subject:  Re: HiTechnic Angle Sensor?

Try 3rd Party Sensor Drivers\hitechnic-angle-test1.c from the sample programs (click File>>Open Sample Program)

Author:  homerun33ss [ Thu Oct 03, 2013 8:35 pm ]
Post subject:  Re: HiTechnic Angle Sensor?

rcahoon wrote:
Click File>>Open Sample Program. Select 3rd Party Sensor Drivers\hitechnic-angle-test1.c

Thanks for the info! Didn't even know that was there :lol:

Author:  mightor [ Fri Oct 04, 2013 1:07 am ]
Post subject:  Re: HiTechnic Angle Sensor?

Almost every single sensor available for the NXT is in there :)

= Xander

Author:  homerun33ss [ Mon Oct 07, 2013 7:07 pm ]
Post subject:  Re: HiTechnic Angle Sensor?

I was wondering if somebody could give me the command lines that the IR Seeker uses as well. I'm kinda new to advanced sensors and it was kinda hard to get information, such as available command lines, from just the sample program, unless i just am not reading it right (which I'm probably not). Thanks!

Author:  rcahoon [ Mon Oct 07, 2013 8:17 pm ]
Post subject:  Re: HiTechnic Angle Sensor?

homerun33ss wrote:
I was wondering if somebody could give me the command lines that the IR Seeker uses as well. I'm kinda new to advanced sensors and it was kinda hard to get information, such as available command lines, from just the sample program, unless i just am not reading it right (which I'm probably not). Thanks!


Xander may have some more documentation, but you can get brief documentation on all the driver's functions by right-clicking on the #include line at the top of the file and selecting "Open include file ..." Documentation is included above each function's definition.

--Ryan

Author:  homerun33ss [ Mon Oct 07, 2013 8:54 pm ]
Post subject:  Re: HiTechnic Angle Sensor?

rcahoon wrote:
homerun33ss wrote:
I was wondering if somebody could give me the command lines that the IR Seeker uses as well. I'm kinda new to advanced sensors and it was kinda hard to get information, such as available command lines, from just the sample program, unless i just am not reading it right (which I'm probably not). Thanks!


Xander may have some more documentation, but you can get brief documentation on all the driver's functions by right-clicking on the #include line at the top of the file and selecting "Open include file ..." Documentation is included above each function's definition.

--Ryan

Alright I'll give that a try. Thanks! :)

Author:  mightor [ Thu Oct 10, 2013 1:41 am ]
Post subject:  Re: HiTechnic Angle Sensor?

I made a small guide on how to set up the drivers, you can check it out here: http://botbench.com/blog/robotc-driver- ... ver-suite/

Let me know if that helps :)

= Xander

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/