|pgm status light after firmware download
|Page 1 of 1|
|Author:||kgrimes [ Mon Apr 06, 2009 3:21 pm ]|
|Post subject:||pgm status light after firmware download|
I have a VEX controller that won't seem to take a firmware download. The Program status light does not go always go out after downloading firmware. Sometimes is does turn off, but later turns back on if I turn the controller power switch off and then back on.
Is this for certain a hardware failure, or is there some other recovery or investigation I can do to root cause my problem?
|Author:||kgrimes [ Wed Apr 08, 2009 2:21 pm ]|
|Post subject:||Re: pgm status light after firmware download|
Hey, I "worked around" the problem by repeating the firmware download on a different workstation. May need to reinstall the firmware file or robot-C entirely on one of my workstations. Thanks.
|Page 1 of 1||All times are UTC - 5 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group