Platforms: CORTEX, PIC (Original VEX)
Date Posted: Sept 6, 2013
Note: You do not need to deactivate your license in order to upgrade for ROBOTC versions 3.0 and above
ROBOTC 3.0 requires a ROBOTC 3.0 license. If you have a ROBOTC for IFI 2.0 license (or older), you can download ROBOTC for IFI 2.0 by going to the ROBOTC for IFI Download area.
Already have a building license?
The drivers for the CORTEX Microcontroller and VEXnet Joysticks are included in the ROBOTC 3.0 installers. If, for any reason, you need to download them separately, here are the downloads:
Download Network Driver (in addition to required driver) if ROBOTC will run from a network:
For access to previous versions, please contact us (include your License ID) at firstname.lastname@example.org.
ROBOTC 3.0 introduces a new and improved way of managing your ROBOTC software, designed to simplify the process of keeping all of your software up-to-date while minimizing the number of downloads and installations you must perform!
Once you have downloaded and installed any version of ROBOTC 3.x, you have everything you need (NXT and Cortex drivers excluded). No Additional downloads of ROBOTC software are required; in fact, don't try to download and install additional versions.
Note: The VEX Programming driver is built into the ROBOTC installer
05/06/2011 If you are using SMART Board software, it may prevent ROBOTC from being able to communicate with the Cortex. Click here for instructions on how to resolve this issue.