ROBOTC.net Blog  

ROBOTC News

ROBOTC for LEGO MINDSTORMS 4.28 BETA

3 comments

ROBOTC 4-28The ROBOTC Development Team is very excited to announce our latest BETA release update, ROBOTC 4.28 BETA! This update is for the LEGO MINDSTORMS (NXT and EV3) robotics systems and includes new features, functionality and a load of bug fixes!

This new build of ROBOTC for LEGO Mindstorms includes a number of new features for the EV3 platform, including USB Joystick Support, File I/O (reading and writing files on the EV3), and also Datalogging while using the EV3 platform. Take a look at the sample programs folder for examples on how to use all of the new features with ROBOTC and the EV3 platform!

To download the 4.28 BETA, use the following links:

Important Setup Information for ROBOTC 4.28 BETA:

LEGO NXT Users:

  • Simply update to the latest ROBOTC firmware from inside of ROBOTC.

LEGO EV3 Users:

  • All users will need to update the  LEGO EV3′s Kernel by connecting the EV3 and selecting “Robot Menu -> Download EV3 Linux Kernel” from inside of ROBOTC. The version number is the same to keep alignment with the EV3 Programming Software and LEGO’s releases, but the Kernel has bug fixes to increase sensor reliability.
  • After updating your EV3′s Linux Kernel, you’ll also need to update the ROBOTC firmware from inside of ROBOTC.

ROBOTC 4.27 -> 4.28 BETA Change Log:

  • All – Updated Help System Documentation for new commands and features.
  • All – Updated Firmware for 10.28 / 4.28 compatibility.
  • All – Added a compiler error when ‘switch’ expression was illegal.
  • All – Support for optional “int” keyword as in the declaration “short int” or “int short” in addition to “short”.
  • All – Add USB Joystick control to Graphical (in loop blocks)
  • EV3 – Fixed user reported bug in Synchronized Motor Movements commands.
  • EV3 – Disabled setting sensor ports to typeNone/modeNone when initially configuring port. This prevented sensor ports from being reconfigured manually afterwards inside a program.
  • EV3 – Added Joystick support for EV3.
  • EV3 – Fixed BMP files not displaying properly on the EV3 screen.
  • EV3 – Added Datalogging for the EV3. It is file based and saves the data in a CSV format under prjs/rc-data/
  • EV3 – Added EV3 file operations for reading/writing to files. Commands are available for reading/writing all types and raw data. Files are saved in the standard ROBOTC projects folder and cannot be saved elsewhere for security/safety reasons.
  • EV3 – Fix EV3 issue of USB connected brick disconnected when COMM link is open and IDE cannot recover when USB link is reconnected.
  • EV3 – Changed ramp up/down parameters to 0 for EV3 motors, as per the LEGO programming environment. This is a feature ROBOTC was using but isn’t supported well by the EV3.
  • EV3 – Fixed issue where motor speed was not normalized to -100 to 100 when values exceeding the maximum were provided.
  • EV3/NXT – Fixed issue with ROBOTC ‘auto-updater’ when launching ROBOTC for LEGO based platforms.
  • EV3 – Adjusted I2C read and write commands to use standard LEGO ioctl. The calls are non-blocking.
  • EV3 – setSensorTypeModeFromWithinOpcode is now used instead of calling for a separate type and mode change. This fixes the issue of bad sensor modes.
  • EV3 – EV3 Touch sensor can now have both bumps and touch value read, regardless of mode
  • EV3 – sensorReset() now calls appropriate reset function, depending on the connection type. If used on Gyro or Touch, the heading or bump count is reset, respectively.

Happy Programming!

Written by Tim Friez

December 23rd, 2014 at 4:34 pm