Archive for August, 2010
Thanks to tbenter for submitting this post!
Here is a video of LEGO Trains run on the good ol’ RCX platform. tbenter actually used a PID algorithm to make sure that the trains are going the correct speed.
Take a look!
Here’s a video of a TETRIX robot running through a small farm. The robot uses its sensors to make sure that it’s running along the lines correctly.
This was submitted by T.N.T. of our forums. Thanks T.N.T.!
The description below is from DRV47 from our forums. Thanks for the post!
This is our first project using the NXTcam v3 frommindsensors.com.
The aim of this bot is to find and shoot down three red targets. It’s programmed with RobotC.
The design is the Multi-Bot by Dave Parker from nxtprograms.com (except for the NXTcam module and the LEGO Color Sensor).
Here are some pictures of the robot:
The robot searches and detects red targets made out of LEGOs, it then moves into position as follows:
– It aims at the center of the target
– It moves forward or backward until the height of the target is right.
If the robot hits anything with the two bumpers, it will move out of the way. The robot will turn on a different LED on the Color Sensor depending on the situation:
-Green while searching.
-Blue while aiming.
-Red while firing (blinking at first).
All comments are welcome and if you wish to contact me, you can send me an e-mail at
You can download the source files here.